Product Installation Instructions for Compatible Motorcycle Oil

Models Covered: Max 330, 400, 450, 500, 570, 650, 800, 850, 1000, 800R, 1000R

Tools and Materials Needed:

1. Tools:

   • Socket or wrench set (appropriate sizes for your motorcycle)
   • Oil filter wrench (if applicable)
     -Funnel
   • Oil drain pan
   • Torque wrench (recommended)

2. Materials:

   • Compatible Motorcycle Oil (specific to your model)
   • New oil filter (if replacing)
   • Oil seal (if necessary)
     -Cleaning cloth or rags

Installation Steps:

1. Preparation:

   • Ensure that the motorcycle is parked on a level surface and the engine is cool.
   • Gather all necessary tools and materials for a smooth installation process.

2. Drain Old Oil:

   • Place the oil drain pan under the motorcycle's oil pan.
   • Carefully remove the oil drain plug using the appropriate socket or wrench.
   • Allow the old oil to completely drain into the pan.

3. Replace Oil Filter (Optional):

   • If replacing the oil filter, use the oil filter wrench to remove the old filter.
   • Before installing the new filter, apply a little new oil to the rubber gasket of the new filter for a better seal.
   • Install the new oil filter by hand, ensuring it is snug but not over-tightened.

4. Add New Oil:

   • Replace the oil drain plug securely and tighten it to the manufacturer's specified torque.
   • Using a funnel, pour the compatible motorcycle oil into the engine through the oil fill cap.
   • Refer to your motorcycle’s manual for the specific oil capacity.

5. Check Oil Level:

   • Allow the motorcycle to sit for a few minutes, then check the oil level using the dipstick or sight glass.
   • Add more oil if necessary until the correct level is achieved.

6. Final Steps:

   • Run the engine for a few minutes to circulate the new oil.
   • Check for any leaks around the oil filter and drain plug.
   • Dispose of the old oil and any used filters properly according to local regulations.

Tips:

• Regularly check your oil level to ensure optimal performance.
• Clean any spills promptly to avoid slipping hazards.

By following these steps, you'll ensure your motorcycle runs smoothly and efficiently with the compatible motorcycle oil. Enjoy your ride!