Product Installation Instructions for Thread Jet Idle Slow Jet Replacement

Compatible Motorcycles: KZ1000, GS1000, GS1100, DR350
Jet Sizes: 30-65

Tools Required:

1. Screwdriver Set:

   • Flathead and Phillips screwdrivers for removing panels and carburetor covers.

2. Wrench/Socket Set:

   • 8mm to 12mm sockets or wrenches for removing the carburetor and other components.

3. Pliers:

   • Fine-tipped pliers to help with removing small parts, if necessary.

4. Carburetor Synchronization Tool: (if required for your motorcycle)

   • For ensuring proper synchronization after installation.

5. Small Container:

   • To hold screws and small parts removed during the process.

6. Cleaning Supplies:

   • Carburetor cleaner or spray to clean the carburetor components during installation.

7. Torque Wrench:

   • To ensure proper tightening of bolts to manufacturer specifications.

8. Work Gloves:

   • To protect your hands during installation.

9. Safety Glasses:

   • To protect your eyes from debris and cleaning solutions.

Installation Steps:

1. Preparation:

   • Ensure your motorcycle is on a stable surface, and disconnect the battery for safety.

2. Remove the Seat or Panel:

   • Use the screwdriver to remove any screws that secure the seat or side panels to access the carburetor.

3. Disconnected the Air Filter:

   • Remove the air filter housing, if necessary, to access the carburetor.

4. Remove the Carburetor:

   • Use the wrench or socket set to disconnect any lines and fasteners holding the carburetor in place, then gently remove it.

5. Access the Idle Jets:

   • Carefully take apart the carburetor to reach the idle slow jets. Note the arrangement for proper reassembly.

6. Replace the Idle Slow Jets:

   • Remove the old slow jets and replace them with the new Thread Jet Idle Slow Jets of the desired size (30-65). Ensure a snug fit.

7. Reassemble the Carburetor:

   • Carefully reassemble the carburetor, ensuring that all components are properly seated and secured.

8. Reinstall the Carburetor:

   • Reattach the carburetor to the motorcycle, ensuring all connections and lines are correctly reconnected.

9. Reconnect the Air Filter:

   • Replace the air filter housing, securing it with screws.

10. Replace the Seat or Panel:

    • Reattach any panels or seating that were removed during the installation process.

11. Final Checks:

    • Reconnect the battery, start the motorcycle, and check for any leaks or unusual sounds.

12. Carburetor Synchronization: (if necessary)

    • Use the carburetor synchronization tool to ensure the engine is running smoothly after installation.

Maintenance Tips:

• Regularly check the idle slow jets for clogs and cleanliness to maintain optimal performance.
• Consult your motorcycle's service manual for specific torque settings and maintenance intervals.

Enjoy improved performance with your new Thread Jet Idle Slow Jets!