Installation Instructions for Racing Steering Bush Front Rigid Collar with Offset Angle for S13 180SX and Similar Models

Tools Required:

1. Socket wrench set
2. Torque wrench
3. Screwdriver set (flathead and Phillips)
4. Allen wrench set
5. Pliers
6. Hammer
7. Adhesive cleaning solution or degreaser
8. Shop rags or cleaning cloths
9. Safety goggles
   10.Gloves

Installation Steps:

1. Preparation:

   • Ensure the vehicle is parked on a level surface and the ignition is off.
   • Engage the handbrake for safety.

2. Remove the Steering Column Cover:

   • Use a screwdriver to remove the screws securing the steering column cover. Carefully lift it off and set aside.

3. Disconnect the Battery:

   • Disconnect the negative terminal of the battery to prevent any electrical issues during installation.

4. Remove the Existing Steering Bush:

   • Identify the existing steering bush and use the appropriate socket wrench to unscrew it.
   • Take note of how it is positioned for easier installation of the new bush.

5. Clean the Area:

   • Use the adhesive cleaning solution or degreaser alongside shop rags to clean the area where the new racing steering bush will be installed.

6. Install the Racing Steering Bush:

   • Position the new racing steering bush in place, ensuring it aligns correctly with the original structure.
   • Use the socket wrench to secure it in place, tightening according to the manufacturer’s specifications with a torque wrench.

7. Reattach the Steering Column Cover:

   • Carefully place the steering column cover back and secure it with screws.

8. Reconnect the Battery:

   • Reconnect the negative terminal of the battery.

9. Test the Steering:

   • Before taking the vehicle for a drive, turn the steering wheel several times to ensure everything is functioning smoothly and there are no unusual noises.

10. Final Check:

    • After a short test drive, recheck the torque on the new bush to ensure everything stays in place.

Safety Reminder:

• Always wear safety goggles and gloves during installation to protect your eyes and hands.
• If you're unsure about any step or lack the necessary tools, consider seeking help from a professional mechanic.

With these instructions, you should be able to successfully install your Racing Steering Bush Front Rigid Collar. Enjoy improved handling and driving experience!