Product Installation Instructions for Oil Filter Compatible with ATV 500 650 650 Quest

Tools Required:

• Adjustable Wrench or Socket Set
• Oil Filter Wrench (optional for easier removal)
• Clean Rags or Paper Towels
  -New Oil Filter
• Engine Oil (check your ATV’s specifications)
• Oil Drain Pan (optional for catching any old oil)
  -Safety Gloves
  -Safety Goggles

Installation Steps:

1. Preparation:

   • Ensure the ATV is parked on a level surface and is turned off.
   • Wear safety gloves and goggles for protection.

2. Gather Tools:

   • Collect all the required tools and the new oil filter.

3. Drain Old Oil (Optional):

   • If necessary, place an oil drain pan under the engine.
   • Remove the drain plug and allow the oil to fully drain out. Replace the plug once drained.

4. Locate the Oil Filter:

   • Locate the existing oil filter on your ATV. Refer to your ATV's manual if you have trouble finding it.

5. Remove Old Oil Filter:

   • Use an adjustable wrench or an oil filter wrench to carefully unscrew the old oil filter. Be prepared for some oil to spill out, which is why the drain pan or rags are necessary.

6. Prepare New Oil Filter:

   • Before installing the new oil filter, apply a small amount of new engine oil to the rubber gasket of the new filter. This helps ensure a good seal.

7. Install New Oil Filter:

   • Screw on the new oil filter by hand until it's snug. Avoid over-tightening, as this can damage the filter.

8. Add New Engine Oil:

   • If you drained the oil earlier, now is the time to add new engine oil. Refer to your ATV's manual for the correct type and amount of oil.

9. Check for Leaks:

   • Once everything is securely in place, start your engine and let it run for a few minutes.
   • Check for any leaks around the new oil filter and ensure everything is functioning properly.

10. Dispose of Old Oil and Filter:

• Properly dispose of the old oil and oil filter at a local recycling or hazardous waste center.

11. Regular Maintenance:

• Remember to check and replace your oil filter regularly to maintain optimal engine performance and fuel efficiency.

Following these steps will help ensure a smooth installation process for your new oil filter, enhancing the performance and longevity of your ATV.