Product Installation Instructions for Motorcycle Oil Filter suitable for RF600R, RF900, RF900R, SFV650, SV650, SV650S, SV650X, SV1000, SV1000S, TL1000, TL1000R, and TL1000S Models

Tools Required:

1. Socket Wrench Set: To remove the oil filter and drain plug.
2. Oil Filter Wrench: For easier removal of the old oil filter.
3. Torque Wrench: To ensure the filter and drain plug are tightened to the manufacturer's specifications.
4. Funnel: To pour new oil without spilling.
5. Oil Drain Pan: To catch the old oil when draining.
6. Rags or Paper Towels: For cleaning up any spills and wiping surfaces.
7. Safety Gloves: To protect your hands while working with oil and filters.

Installation Steps:

1. Prepare the Workspace:

   • Ensure your motorcycle is on a stable surface and secured with a bike stand.

2. Drain the Old Oil:

   • Place the oil drain pan underneath the engine.
   • Use the socket wrench to remove the drain plug and let the old oil fully drain into the pan.

3. Remove the Old Oil Filter:

   • Use the oil filter wrench to unscrew the old oil filter. Be cautious as it may still contain residual oil.

4. Prepare the New Oil Filter:

   • Before installation, apply a thin layer of fresh oil on the rubber O-ring of the new oil filter to ensure a proper seal.

5. Install the New Oil Filter:

   • Screw the new oil filter into place by hand. Make sure it is snug but do not over-tighten.

6. Reconnect the Drain Plug:

   • Replace the drain plug and tighten it to the manufacturer’s specifications with the torque wrench.

7. Add New Oil:

   • Using a funnel, pour the appropriate type and amount of new oil into the engine.

8. Check for Leaks:

   • Start the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug.

9. Dispose of Old Oil and Filter:

   • Properly dispose of the old oil and filter according to local regulations.

Conclusion:
Regularly replacing your oil filter enhances your motorcycle's performance and prolongs engine life. Utilizing these steps and the listed tools will help ensure a smooth installation process. Thank you for choosing our oil filter for your motorcycle maintenance needs!