Product Installation Instructions for Compatible Motorcycle Engine Components Oil Filter

Tools Required:

1. Oil Filter Wrench - To easily remove the old oil filter.
2. Ratchet and Socket Set - For removing the drain plug and ensuring secure fittings.
3. Oil Drain Pan - To catch any oil that may spill during the process.
4. Shop Towels or Rags - For cleaning up any spills and wiping parts.
5. Safety Gloves - To protect your hands from oil and sharp components.
6. Funnel - To assist in refilling the engine oil.
7. Torque Wrench (optional) - To ensure proper tightening of components, if required.

Installation Steps:

1. Preparation:

   • Put on safety gloves and make sure the motorcycle is on a stable surface.
   • Gather all the required tools.

2. Remove the Old Oil Filter:

   • Use the oil filter wrench to loosen and remove the old oil filter. Be cautious, as some oil may spill out. Use the oil drain pan to catch it.

3. Drain Oil:

   • If changing the oil, remove the drain plug with the ratchet and socket set to allow the old oil to drain completely into the pan. Replace the drain plug once drained.

4. Install the New Oil Filter:

   • Before installing the new oil filter, apply a small amount of new oil to the rubber gasket of the filter. This helps create a better seal.
   • Screw the new oil filter in place by hand until snug, and then tighten it slightly using the oil filter wrench (do not over-tighten).

5. Refill Engine Oil:

   • Using the funnel, refill the engine with the recommended type and amount of oil through the fill cap.

6. Check for Leaks:

   • Start the motorcycle and let it run for a few minutes. Check around the new oil filter and drain plug for any signs of leaks.

7. Dispose of Old Oil and Filter:

   • Properly dispose of the used oil and old oil filter according to local regulations.

By following these instructions, you can ensure a smooth installation of your new oil filter, optimizing the performance of your D Heritage Softail Classic and Fat Boy motorcycle. Regular maintenance will help extend the life of your engine and reduce overall maintenance costs.