Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !
Product Installation Guide for 2PC Fuel Tank Assembly for YB125 125cc Engine Model 4FPF451500
Tools Required:
- Wrench Set - For loosening and tightening bolts.
- Screwdriver Set (both flathead and Phillips) - For removing screws.
- Pliers - For gripping and manipulating components.
- Socket Set - For tightening nuts in hard-to-reach areas.
- Fuel Line Pliers (optional) - If applicable for fuel line removal.
- Rags or Towels - To clean any spilled fuel and keep your workspace tidy.
- Safety Glasses - To protect your eyes during installation.
Installation Steps:
-
Safety First: Make sure the motorcycle is on a flat surface and has cooled down. Disconnect the battery to prevent any electrical issues.
-
Drain Old Fuel: If necessary, drain the fuel from the existing tank to avoid spills during the removal process.
-
Remove Existing Fuel Tank:
- Use the socket set and wrench to remove the bolts securing the fuel tank.
- Carefully disconnect the fuel lines from the tank using pliers. Ensure you have a rag handy to catch any remaining fuel.
-
Install the New 2PC Fuel Tank Assembly:
- Position the new fuel tank in place and align it with the mounting points.
- Secure the tank using the bolts and tighten them with the wrench.
-
Reconnect Fuel Lines: Carefully connect the fuel lines to the new tank, ensuring a snug fit to avoid leaks.
-
Check for Leaks: Before reconnecting the battery, turn on the fuel supply and check for any leaks around the connections.
-
Reconnect Battery: Reattach the battery terminals and ensure they are secure.
-
Final Checks: Start the engine to confirm that it runs smoothly and that the fuel supply is optimized.
Conclusion:
By following these steps, you can easily install the 2PC Fuel Tank Assembly in your motorcycle. Enjoy improved engine performance and an enhanced riding experience!
