Motorcycle Oil Filter Installation Instructions for VN1500 VN1700 Vulcan Voyager Custom ABS Models (2011-2012)

Tools Needed:

1. Wrench Set - To remove the old oil filter.
2. Oil Filter Wrench - For easy removal of the oil filter if it's tightly secured.
3. Socket Set - For various bolts and components that may need to be removed.
4. Oil Drain Pan - To catch old oil during the process of changing the filter.
5. Rags or Shop Towels - For cleaning and wiping any spills.
6. Funnel - To refill the engine oil without spills.
7. New Engine Oil - Refer to your owner's manual for the correct type and amount.
8. Rubber Gloves - To keep your hands clean while working with oil.

Installation Steps:

1. Prepare the Motorcycle:

   • Ensure the motorcycle is parked on a level surface and is secure. Use a motorcycle stand if necessary.

2. Drain the Engine Oil:

   • Place the oil drain pan beneath the engine's oil pan.
   • Remove the drain plug using a socket or wrench, letting the old oil fully drain into the pan.

3. Remove the Old Oil Filter:

   • Use the oil filter wrench to carefully unscrew the old oil filter.
   • Allow any remaining oil to drain out into the pan.

4. Prepare the New Oil Filter:

   • Apply a thin layer of new engine oil to the rubber gasket on the new oil filter. This helps to create a good seal and makes the filter easier to remove in the future.

5. Install the New Oil Filter:

   • Screw the new oil filter onto the engine by hand. Ensure it’s snug but avoid over-tightening.

6. Reinstall the Drain Plug:

   • Once the oil has fully drained, reinstall the drain plug and tighten it securely.

7. Refill Engine Oil:

   • Use a funnel to pour the new engine oil into the engine through the oil filler cap.
   • Refer to your owner's manual for the correct amount of oil.

8. Check for Leaks:

   • Start the engine and let it run for a minute, checking for any leaks around the oil filter and drain plug.
   • Turn off the engine and check the oil level using the dipstick, adding more oil if necessary.

9. Dispose of Old Oil and Filter:

   • Take the old oil and filter to a recycling center or an automotive store that offers disposal services.

Conclusion:

Following these simple steps will help you successfully install the new oil filter on your VN1500 or VN1700 Vulcan Voyager Custom ABS motorcycle, ensuring reliable performance and protection for your engine. Happy riding!