Product Installation Instructions for Motorcycle Cartridge Oil

Compatibility:
This Motorcycle Cartridge Oil is suitable for various models such as FE250, FE350, FE450, FC250, FC350, FC450, FS450, FX350, and FX450.

Tools Required:
Before you begin the installation process, please ensure you have the following tools ready:

1. Socket wrench set (including a torque wrench)
2. Screwdriver set (Phillips and flathead)
3. Oil catch pan or container
4. Funnel
5. Clean rags or paper towels
6. Safety goggles and gloves (for protection)

Installation Steps:

1. Preparation:

   • Park your motorcycle on a stable surface and ensure it is on a level ground.
   • Wear your safety goggles and gloves for protection.

2. Remove the Old Cartridge Oil:

   • Place the oil catch pan under the motorcycle to collect any old oil.
   • Use the socket hurt to remove the drained oil plug, allowing the old oil to fully drain into the pan.
   • Clean the area around the plug and replace it securely after draining.

3. Install the New Cartridge Oil:

   • Open the Motorcycle Cartridge Oil package.
   • Use a funnel to pour the new oil into the designed oil reserver carefully to avoid spillage.
   • Ensure to fill to the recommended level as specified in your motorcycle manual.

4. Final Steps:

   • Replace the oil plug securely.
   • Clean any spills with rags or paper towels.
   • Dispose of the old oil responsible according to local regulations.

5. Test Ride:

   • Once everything is secured and cleaned, start your motorcycle and take a short test ride to ensure proper performance.
   • Check for any leaks and verify that the oil level remains within the recommended range.

Note:
This installation process is designed for quick replacements and does not require professional tools. However, if you encounter any issues during installati on or are unsure about any step, it is recommended to consult a professional mechanic.

Enjoy enhanced riding performance with your new Motorcycle Cartridge Oil!