Product Installation Instructions for Durable Twist Throttle Handlebar Grips

Tools Required:

• Phillips screwdriver
• Flathead screwdriver
• Allen wrench set (if applicable)
  -Cleaning cloth
• Lubricant (optional, for easier installation)
• Safety gloves (optional)

Installation Steps:

1. Preparation:

   • Ensure that your bike is on a stable surface and the engine is off.
   • Wear safety gloves if desired for protection.

2. Remove Existing Grips:

   • Use a flathead screwdriver to carefully pry off the old grips from the handlebars. Be cautious not to damage the handlebar surface.
   • If the old grips are glued, you may need to apply some lubricant to loosen them.

3. Clean the Handlebars:

   • Use a cleaning cloth to wipe down the handlebars and remove any debris or residue.

4. Install New Grips:

   • Align the new Durable Twist Throttle Handlebar Grips with the handlebar. Ensure the ergonomic shape is positioned for a comfortable grip.
   • If necessary, apply a small amount of lubricant inside the grips for easier installation.

5. Secure the Grips:

   • Slide the new grips into place, ensuring they fit snugly against the throttle and handlebar ends.
   • If your model has specific hardware or clamps, locate and secure them according to the manufacturer’s recommendations.

6. Test the Installation:

   • After installation, check that the grips rotate freely and respond smoothly. Make sure there are no obstructions and they are properly aligned.

7. Final Check:

   • Ensure everything is tightened and secure. Take a moment to adjust the grip angle if necessary for your riding comfort.

Notes:

• Always refer to your bike’s user manual for specific installation details related to your model.
• If you encounter any difficulties, consider seeking assistance from a professional mechanic.

Enjoy your enhanced riding experience with the new Durable Twist Throttle Handlebar Grips!