Product Installation Instructions for Motorcycle Oil Tank Cap

Compatible Models:
C92, CA95, CB77, CA77, CB72, XR75, XL70, CB100, CB125, S90, CL90, CG125, S110, XL100, XL125
Part Number: 17620-028-054

Tools Required:

1. Screwdriver (flathead or Phillips, depending on the oil tank cap type)
2. Socket Wrench (optional, based on specific model requirements)
3. Clean Cloth (for cleaning the surface area)
4. Lubricant (optional, for sealing if needed)

Installation Steps:

1. Preparation:
   Ensure your motorcycle is on a stable surface. Turn off the engine and allow it to cool down completely.

2. Remove Old Oil Tank Cap:

   • Using the appropriate screwdriver, carefully unscrew the old oil tank cap. If needed, use a socket wrench for added leverage.
   • Clean the area around the oil tank opening with a cloth to remove any dirt or debris.

3. Inspect Sealing Surface:

   • Check the sealing surface for any damage or wear. Ensure it is clean and free from old sealant or oil residues.

4. Install New Oil Tank Cap:
   -Align the new oil tank cap with the opening.

   • Turn the cap clockwise until it is securely in place. Be careful not to overtighten, as this may damage the threads.

5. Final Check:

   • Gently shake the cap to ensure that it fits well and there are no leaks.
   • Close the oil tank securely and check for any signs of leakage after a short ride.

6. Maintenance Tips:

   • Regularly check the oil tank cap for any signs of wear or damage.
   • Clean the sealing area periodically to maintain a secure fit and prevent leaks.

Note:
For best performance and safety, always refer to your motorcycle’s owner manual for specific guidelines related to oil tank maintenance.

Thank you for choosing our Motorcycle Oil Tank Cap! Enjoy your ride!