Product Installation Instructions for Compatible Rear Brake Pads for 125cc to 500cc Models with 12-Inch Rear Wheel

Tools Required:

1. Socket Wrench Set - To remove the brake caliper and wheel assembly.
2. Torque Wrench - To ensure bolts are tightened to the manufacturer's specifications.
3. Pliers - Useful for removing clips and securing the brake pads.
4. Flathead and Phillips Screwdrivers - For any screws that may need to be removed during installation.
5. Brake Cleaner - To clean the brake components before installation.
6. Lint-Free Cloth - To wipe down any parts and prevent contamination.
7. Jack/Stands - To lift the motorcycle safely for access to the rear wheel.

Installation Steps:

1. Preparation

   • Make sure the motorcycle is on a stable surface and securely lift the rear using a jack or stands.
   • Remove the rear wheel, following the manufacturer’s instructions.

2. Removal of Old Brake Pads

   • Use the socket wrench to remove the bolts holding the brake caliper in place.
   • Carefully slide the caliper off the brake rotor and set it aside.
   • Take out the old brake pads from the caliper by removing any retaining clips or pins.

3. Cleaning the Brake Components

   • Use brake cleaner and a lint-free cloth to clean the caliper, rotor, and any other visible components. This ensures optimal performance of the new pads.

4. Installation of New Brake Pads

   • Take the new brake pads from the package and ensure they are aligned correctly for the caliper.
   • Insert the new pads into the caliper and secure them with the retaining clips or pins.
   • Reposition the caliper over the brake rotor and align it with the mounting bracket.

5. Reassembly

   • Reattach the brake caliper using the previously removed bolts and tighten them with the torque wrench to the specified settings.
   • Reinstall the rear wheel and ensure all nuts and bolts are securely tightened.

6. Final Checks

   • Pump the brake lever a few times to ensure the brake pads seat properly against the rotor.
   • Check for any irregular sounds or issues before taking the motorcycle for a test ride.

Safety Precautions:

• Always wear safety gloves and goggles when working on your motorcycle.
• Ensure the motorcycle is turned off and stable before starting the installation.

By following these steps, you can effectively install your new rear brake pads, enhancing the performance and safety of your motorcycle. Enjoy your ride!