Here is a product installation manual in English:

Installation Manual

Tools Needed:

1. Adjustable wrench or socket wrench
2. Torque wrench
3. Pliers (needle-nose and slip-joint)
4. Screwdrivers (flathead and Phillips)
5. Safety glasses
6. Work light (optional)

Pre-Installation Check:

1. Ensure the motorcycle is on a level surface and apply the parking brake.
2. Remove any protective covers or fairings to access the rear brake caliper.
3. Take a photo of the original brake pads and caliper setup for reference.

Removal of Original Brake Pads:

1. Loosen the caliper bolts using an adjustable wrench or socket wrench.
2. Remove the caliper from the rotor using a screwdriver to pry it off.
3. Remove the old brake pads from the caliper.

Installation of New Brake Pads:

1. Take the new brake pads and insert them into the caliper, ensuring proper orientation.
2. Reattach the caliper to the rotor using the screwdriver to secure it.
3. Tighten the caliper bolts using a torque wrench to the specified torque value.

Additional Tips:

• Use a work light to illuminate the area if necessary.
• Apply a small amount of lubricant to the caliper pins for smooth operation.
• Test the brakes after installation to ensure proper function.

Warranty and Disclaimer:

• These brake pads are designed to fit multiple motorcycle models as listed.
• Installation instructions may vary depending on specific motorcycle model and year.
• Please consult a professional mechanic if unsure about any aspect of the installation process.

Note: This is a generic installation manual and may not cover all specific requirements for each motorcycle model. Always consult the motorcycle manufacturer's instructions and recommendations for specific installation procedures.