Installation Instructions for Gasket Set with Seals Suitable for Models 391834 and 492653

Overview:
This gasket set is designed for easy installation and compatibility with models 391834 and 492653. Follow the steps below to ensure a successful installation.

Tools Required:

• Screwdriver set (flathead and Phillips head)
  -Wrench set
  -Socket set
  -Torque wrench
• Utility knife or gasket scraper
  -Clean cloth or rag
• Sealant (if required)
• Safety gloves
• Safety goggles

Installation Steps:

1. Preparation:

   • Ensure the equipment is powered off and disconnected from any electrical source.
   • Gather all necessary tools and the gasket set.

2. Remove Old Gaskets:

   • Using a utility knife or gasket scraper, carefully remove the old gaskets and seals from the mating surfaces.
   • Clean the surfaces using a clean cloth to remove any residual material or contaminants.

3. Inspect the Surfaces:

   • Check the mating surfaces for any damage or wear. If any issues are found, repair or replace damaged components before proceeding.

4. Select the Appropriate Gaskets:

   • From the gasket set, select the gaskets and seals that match your equipment model (391834 or 492653).

5. Install New Gaskets:

   • Place the new gaskets onto the cleaned mating surfaces. Ensure they fit snugly and are aligned correctly. If required, apply a thin layer of sealant to enhance sealing.

6. Reassemble the Equipment:

   • Carefully reassemble any components, ensuring that the gaskets stay in place.
   • Use the correct tools to tighten fasteners evenly.

7. Tightening:

   • Utilize a torque wrench to tighten the bolts or screws to the manufacturer's specified torque settings. This is crucial for ensuring a proper seal.

8. Final Inspection:

   • Inspect the assembly to ensure everything is properly aligned and securely fastened.

9. Test the Equipment:

   • Reconnect the equipment to power and perform a test run to check for leaks or abnormalities.

Safety Precautions:

• Always wear safety gloves and goggles when working with tools and equipment.
• Ensure the area is well-ventilated while working.

By following these instructions, you can install your gasket set with confidence, ensuring effective sealing and optimal performance for your devices.