Installation Instructions for Replacement Air Filter for 50cc Agility Carry One RS DJ Vitality 4T

Tools Needed:

1. Screwdriver (Philips or Flathead, depending on your vehicle's screws)
2. Wrench Set (if necessary for removing any bolts)
3. Pliers (optional, for handling clips or tight spaces)
4. Clean Cloth (to wipe the area around the air filter compartment)
5. Vacuum (optional, for cleaning any debris in the air filter area)

Installation Steps:

1. Preparation:

   • Make sure your vehicle is turned off and has cooled down.
   • Gather all necessary tools and the replacement air filter.

2. Locate the Air Filter Compartment:

   • Refer to your vehicle's user manual to find the exact location of the air filter compartment.

3. Remove the Cover:

   • Use the screwdriver or wrench to remove any screws or bolts securing the air filter cover. Keep these parts in a safe place for reinstallation.

4. Take Out the Old Air Filter:

   • Carefully pull out the old air filter from its compartment. If it is stuck, gently wiggle it to loosen.

5. Clean the Compartment:

   • Use a clean cloth or vacuum to remove any debris or dirt from the air filter compartment to prevent contamination.

6. Install the New Air Filter:

   • Take your new replacement air filter and place it into the compartment. Ensure it sits securely and fits snugly without gaps.

7. Reattach the Cover:

   • Once the new filter is in place, put the air filter cover back on and secure it with the screws or bolts you removed earlier.

8. Final Check:

   • Give everything a final check to ensure the cover is securely fastened and there are no loose parts.

9. Start Your Engine:

   • Start your vehicle and listen for any unusual sounds. Ensure that the engine runs smoothly.

Maintenance Reminder:

• Regularly check your air filter and replace it as per your vehicle's maintenance schedule to ensure optimal performance and longevity of your engine.

By following these steps, you will enhance your engine’s performance and enjoy a smoother ride.