Here is a product installation guide in English:

Installation Guide for Motorcycle Clutch Cover Gasket

Preparation:

Before starting the installation, please ensure you have the following tools and materials:

• New clutch cover gasket (part number: 11482-14D03)
• Torx screwdriver (for removing the old gasket)
• Socket wrench or ratchet and socket (for removing the clutch cover bolts)
  *Clean rag or cloth
• Gloves and safety glasses (recommended)

Step 1: Remove the Old Gasket

1. Locate the clutch cover on your motorcycle and remove the Torx screws that hold it in place.
2. Carefully pull the clutch cover away from the engine and gently pry the old gasket out of its housing.
3. Remove any remaining old gasket material and debris from the clutch cover and engine surface.

Step 2: Clean the Clutch Cover and Engine Surface

1. Use a clean rag or cloth to wipe down the clutch cover and engine surface, removing any dirt, grime, or old gasket material.
2. Make sure the surface is clean and dry before proceeding.

Step 3: Install the New Gasket

1. Take the new clutch cover gasket (part number: 11482-14D03) and align it with the clutch cover.
2. Press the new gasket firmly into its housing, making sure it is properly seated.
3. Make sure the gasket is centered and evenly spaced.

Step 4: Reinstall the Clutch Cover

1. Place the clutch cover back over the engine and align it with the bolts.
2. Use a socket wrench or ratchet and socket to tighten the clutch cover bolts in a star pattern (tightening one bolt a little, then moving to the next one, and so on).
3. Make sure the bolts are tightened securely, but do not overtighten.

Step 5: Check for Leaks

1. Start the engine and let it run for a few minutes.
2. Check the clutch cover and gasket for any signs of leaks or oil seepage.
3. If you notice any leaks, tighten the bolts further or replace the gasket if necessary.

Tips and Reminders:

• Make sure to use a clean rag or cloth to wipe down the clutch cover and engine surface during installation.
• Use gloves and safety glasses to protect yourself from any sharp edges or debris.
• If you are not comfortable with this installation, consider consulting a professional mechanic.
• This installation guide is for reference only and may not be applicable to all models or year of your motorcycle. Always consult your owner's manual or manufacturer's instructions for specific guidance.