Product Installation Instructions for 2-Pack Rubber Dust Cover for Brake Calipers and Shock Absorbers

Overview:
These rubber dust covers are designed to provide optimal protection for your brake calipers and shock absorbers. With high-quality rubber material, they ensure long-lasting durability and effectiveness.

Tools Required:

• Screwdriver (flathead and/or Phillips)
  -Pliers
• Torque wrench (optional, for bolt tightening)
  -Clean cloth or rag
• Brake cleaner (optional, for cleaning surfaces)

Installation Steps:

1. Prepare Your Vehicle:

   • Park your vehicle on a flat, stable surface.
   • Engage the parking brake to prevent any movement during installation.

2. Gather the Required Tools:

   • Ensure you have all the listed tools on hand for a smooth installation process.

3. Remove the Wheel:

   • Using a lug wrench, loosen the wheel nuts slightly.
   • Lift the vehicle using a jack and secure it with jack stands for safety.
   • Completely remove the wheel to access the brake components.

4. Clean the Area:

   • Use a clean cloth or rag to wipe down the brake caliper and surrounding area.
   • If necessary, spray brake cleaner on the components to remove any dirt, dust, or debris.

5. Install the Rubber Dust Covers:

   • Align the rubber dust cover with the brake caliper or shock absorber.
   • Slide the cover over the component ensuring a snug fit.
   • If applicable, secure the dust cover in place using any clips or retention features provided with the dust cover.

6. Reattach the Wheel:

   • Place the wheel back onto the hub.
   • Hand-tighten the lug nuts before lowering the vehicle back to the ground.
   • Once the vehicle is on the ground, use the torque wrench to tighten the lug nuts to the manufacturer’s specified torque settings.

7. Final Inspection:

   • Check that the rubber dust covers are securely in place.
   • Inspect the brake calipers and shock absorbers for any additional maintenance needs.

8. Test Drive:

   • Before driving at normal speeds, perform a short test drive to ensure everything is functioning correctly.

Note:
For any specific model recommendations or detailed instructions, please refer to the vehicle's service manual.

By following the steps above, you can ensure the proper installation of the rubber dust covers, enhancing the performance and lifespan of your brake system.