Motorcycle Oil Filter Installation Instructions

Compatibility:

This oil filter is suitable for the following motorcycle models:
-SDR125
-DRZ125
-DR200 SE
-DR200S

• Van Van RV125
• RV200
• Burgman AN250
• AN400
• SP125
• SP200

Tools Required:

To successfully install the oil filter, you will need the following tools:

1. Oil Filter Wrench - For easy removal and installation of the oil filter.
2. Socket Wrench Set - To remove the oil drain plug and access the oil filter area.
3. Oil Pan - To catch old oil during the drain process.
4. Rags or Towels - For cleaning any spills and wiping off old oil.
5. Funnel - To pour new oil into the engine after replacing the filter.
6. New Oil - Ensure you have the correct type and quantity of oil for your motorcycle.
7. Gloves - To keep your hands clean and protect your skin from oil.

Installation Steps:

1. Prepare your Workspace:

   • Ensure your motorcycle is on a stable surface and properly supported.
   • Place the oil pan under the engine to catch any oil that drains out.

2. Drain Old Oil:

   • Use the socket wrench to remove the oil drain plug and let the old oil fully drain into the pan.
   • Replace the drain plug once all oil has drained.

3. Remove the Old Oil Filter:

   • Use the oil filter wrench to unscrew the old oil filter from the engine.
   • Be cautious as there may be some residual oil inside the filter.

4. Install the New Oil Filter:

   • Apply a thin layer of new oil to the rubber seal of the new filter. This helps ensure a proper seal.
   • Screw the new filter onto the engine by hand until snug. Do not overtighten.

5. Add New Oil:

   • Remove the oil filler cap and use the funnel to pour new oil into the engine.
   • Refer to your motorcycle's manual for the proper oil type and amount.

6. Check for Leaks:

   • Start the engine and let it idle for a few minutes.
   • Check around the new oil filter and drain plug for any leaks.

7. Dispose of Old Oil and Filter:

   • Properly dispose of the old oil and filter at a recycling center or an appropriate disposal location.

Conclusion:

With these steps, you can successfully install your new motorcycle oil filter. Regular maintenance, including oil filter replacement, will help extend the life of your engine and improve overall performance. Enjoy your ride!