Product Installation Instructions for Dual-Stage Foam Air Filter for Off-Road Motorcycles

Compatibility:
This air filter is compatible with 125, 250, and 450 models of off-road motorcycles from 2004 to 2018, ensuring broad applicability.

Advanced Design:
The dual-stage foam filter structure provides superior airflow and filtration performance, effectively preventing impurities from entering the engine.

Easy Installation:
The installation process is simplified, allowing users to complete it quickly without professional tools, enhancing convenience.

Durable Material:
Made from high-quality foam material, the filter exhibits excellent wear resistance, capable of standing various harsh environments.

Simple Maintenance:
The cleaning and re-lubrication process is straightforward, helping to extend the filter's lifespan and maintain optimal performance.

Tools Required:

1. Flathead Screwdriver - To remove screws securing the air filter cover.
2. Phillips Screwdriver - If applicable, to remove screws on certain models.
3. Cleaning Brush - For cleaning the air filter housing.
4. Soap and Water - For washing the foam filter.
5. Air Filter Oil - To re-lubricate the foam filter after cleaning.
6. Rags or Cloth - For drying and wiping down surfaces.

Installation Steps:

1. Preparation

   • Ensure you have the necessary tools ready.
   • Make sure the motorcycle is on a stable surface and turned off.

2. Remove the Air Filter Cover

   • Use the flathead or Phillips screwdriver to remove screws holding the air filter cover in place.

3. Take Out the Old Filter

   • Carefully remove the old air filter from the housing. Inspect for any debris or damage in the housing.

4. Clean the Air Filter Housing

   • Use a cleaning brush and a cloth with soap and water to clean the air filter housing thoroughly.

5. Clean the New Foam Filter

   • If the new filter is dirty, wash it with soap and water. Rinse and let it dry completely.

6. Re-lubricate the Foam Filter

   • After drying, apply air filter oil evenly over the foam filter. Ensure it’s thoroughly saturated but not dripping.

7. Install the New Filter

   • Place the new foam air filter into the housing, ensuring a snug fit.

8. Reattach the Air Filter Cover

   • Position the air filter cover back in place and secure it with the screws you removed earlier.

9. Final Check

   • Ensure everything is tightly secured and there are no loose parts before starting your motorcycle.

By following these instructions, you'll successfully install your new dual-stage foam air filter and ensure your motorcycle maintains optimal performance. Enjoy your ride!