Product: Compatible Front Left and Right ABS Speed ​​Sensor for SLK SLC Models A1729056101

Installation Instructions:

Tools Required:

• Torx screwdriver (T20)
• Phillips screwdriver
• Socket wrench (10mm and 12mm)
• Pliers
• Wire connector crimp tool
• Multimeter (optional)

Step 1: Prepare the Vehicle

1. Make sure the vehicle is parked on a level surface and apply the parking brake.
2. Turn off the engine and engage the parking brake.

Step 2: Locate the ABS Speed ​​Sensor

1. Locate the ABS speed sensor on the front left and right wheels of the vehicle.
2. The sensor is usually attached to the steering knuckle or suspension component.

Step 3: Remove the Old Sensor

1. Use a Torx screwdriver (T20) to remove the screws holding the sensor in place.
2. Gently pull the sensor away from the steering knuckle or suspension component.
3. Disconnect the electrical connector from the sensor.

Step 4: Install the New Sensor

1. Connect the electrical connector to the new sensor.
2. Mount the new sensor to the steering knuckle or suspension component using the Torx screws.
3. Tighten the screws securely.

Step 5: Test the ABS System

1. Use a multimeter to test the ABS system for proper function.
2. Start the engine and check for any error lights or warning messages on the dashboard.
3. Perform a test drive to ensure the ABS system is functioning properly.

Tips and Precautions:

• Make sure to purchase a high-quality replacement sensor to ensure proper function and reliability.
• If you are not comfortable with this installation, consult a professional mechanic for assistance.
• Always refer to your owner's manual for specific instructions and guidelines for your vehicle.