Here is a product installation guide for the Cold Starter Choke Valve for FCR MX Carburetor Compatible Starter Valve Replacement 1166 844 2100:

Installation Guide

Tools Needed:

• Socket wrench or ratchet and socket (10mm or 12mm)
• Torx screwdriver (optional)
• Pliers (optional)
• Wire harness or electrical tape
• New gasket or O-ring (if required)

Precautions:

• Make sure to disconnect the battery before starting the installation.
• Wear protective gloves and safety glasses to avoid injury.
• Refer to your vehicle's repair manual for specific instructions and precautions.

Step 1: Locate the Old Starter Valve

• Find the old starter valve on your FCR MX carburetor. It is usually located on the side or top of the carburetor.
• Take note of the wire harness or electrical connections attached to the old valve.

Step 2: Remove the Old Starter Valve

• Use a socket wrench or ratchet and socket to loosen and remove the retaining screw or bolt holding the old valve in place.
• Gently pull out the old valve from its mounting bracket.
• If the old valve is stuck, use a Torx screwdriver or pliers to gently pry it loose.

Step 3: Inspect and Clean the Area

• Inspect the area around the old valve for any debris or dirt.
• Clean the area with a soft cloth or brush to ensure a smooth installation.

Step 4: Install the New Starter Valve

• Place the new starter valve in its mounting bracket, ensuring it is properly seated.
• Hand-tighten the retaining screw or bolt to secure the valve in place.
• Tighten the screw or bolt in a star pattern to avoid stripping the threads.

Step 5: Reconnect Electrical Connections

• Reconnect the wire harness or electrical connections to the new starter valve.
• Use electrical tape to secure any loose wires.

Step 6: Test the Starter Valve

• Turn the ignition switch to the "on" position and check for any signs of leaks or proper function.
• Start the engine and listen for any unusual sounds or vibrations.

Tips and Reminders:

• Make sure to properly torque the retaining screw or bolt to avoid any damage or leaks.
• If you encounter any issues during installation, consult your vehicle's repair manual or contact a professional mechanic.
• Regularly check and maintain your starter valve to ensure optimal performance and longevity.