Product Installation Instructions for Motorcycle Oil Filter Compatible with LT250 Quadrunner Models

Tools Required:

1. Socket Wrench Set - To remove the oil filter and drain plug.
2. Oil Filter Wrench - For easy removal of the old oil filter.
3. Drain Pan - To catch the old oil during the changing process.
4. Gloves - To keep your hands clean and protected.
5. Rags or Shop Towels - For wiping any spills and cleaning up.
6. Torque Wrench - To ensure the oil drain plug is properly tightened (if required).
7. Funnel - For adding new oil after the filter change.

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is on a flat, stable surface.
   • Start by warming up the engine for a few minutes to thin the oil for easier drainage, then turn it off and let it cool slightly.

2. Remove Old Oil:

   • Place the drain pan under the oil drain plug.
   • Using the socket wrench, remove the drain plug and allow the old oil to completely drain into the pan.

3. Remove Old Oil Filter:

   • Use the oil filter wrench to carefully remove the old oil filter. Make sure to tip it upright as you remove it to prevent any residual oil from spilling.

4. Prepare New Oil Filter:

   • Before installing the new oil filter, apply a small amount of new oil onto the rubber O-ring of the filter to ensure a proper seal.

5. Install New Oil Filter:

   • Hand-tighten the new oil filter into place. Do not overtighten; follow the manufacturer's guidelines for installation.

6. Reinstall Drain Plug:

   • Replace the drain plug and tighten it securely with the torque wrench, if necessary.

7. Add New Oil:

   • Using the funnel, pour the new oil into the engine through the oil fill cap, checking the owner's manual for the correct amount and type of oil.

8. Check for Leaks:

   • Start the engine and let it run for a few minutes. Check under the motorcycle for any signs of leaks from the oil filter or drain plug.

9. Dispose of Old Oil and Filter:

   • Properly dispose of the used oil and oil filter at a recycling center or your local auto shop.

Congratulations! You've successfully installed your new oil motorcycle filter. Regular maintenance will help keep your engine running smoothly.