Zuma BWS 125 Left Side Water Bottle Holder Organizer Installation Guide

Tools Needed:

1. Phillips screwdriver (optional)
2. 5mm Allen wrench (optional)
3. Allen key (included in the package)
4. Clean cloth for cleaning the area on the bike frame

Installation Steps:

1. Prepare Your Bicycle:

   • Ensure your bicycle is on a stable surface.
   • Clean the area on the bike frame where you wish to install the water bottle holder to remove any dirt or debris.

2. Review the Components:

   • Open the package and check for the following components:
     • Zuma BWS 125 Water Bottle Holder
       -Mounting brackets
     • Screws and nuts
     • Allen key

3. Position the Holder:

   • Decide on the optimal position for the water bottle holder on your bike frame. Ideally, it should be easily accessible while riding.

4. Attach the Mounting Brackets:

   • Align the mounting brackets with the holes on the water bottle holder.
   • Place the screws through the brackets into the holder to secure them.

5. Secure the Holder:

   • Using the Allen key, tighten the screws to firmly attach the water bottle holder to the brackets.
   • Make sure it is tightly secured, but be careful not to overtighten as it may damage the holder.

6. Final Checks:

   • Verify that the holder is stable and does not wobble.
   • Test the fit of your water bottle and other items to ensure they can be easily inserted and removed.

7. Enjoy Your Ride:

   • Once installed, you are ready to use the Zuma BWS 125 Water Bottle Holder. Stay hydrated and enjoy your cycling experience!

Note:
No professional tools are required for this installation, making it suitable for any cyclist to set up quickly and efficiently.