Product Installation Instructions for Compatible Motor Front Fork Oil Seal Dust Cover 33x45x8 mm

Tools Required:

1. Flathead screwdriver
2. Phillips screwdriver
3. Pliers
4. Socket wrench set
5. Torque wrench
   6.Clean cloth or rag
6. Grease (optional, for added protection)

Installation Steps:

1. Preparation:

   • Ensure your motorcycle is on a stable surface and the engine is off.
   • Gather all necessary tools listed above.

2. Remove the Front Wheel:

   • Use a socket wrench to loosen and remove the axle nut.
   • Carefully slide the axle out to remove the front wheel. Set the wheel aside.

3. Access the Front Fork:

   • Remove any fender or brake components that may obstruct access to the front forks.
   • Use appropriate screwdrivers to detach any screws or bolts.

4. Remove Old Dust Cover:

   • Inspect the old dust cover and carefully pry it off using a flathead screwdriver or pliers.
   • Take care not to damage the front fork or oil seal during removal.

5. Clean the Area:

   • Use a clean cloth or rag to wipe down the area around the oil seal to remove any dirt or debris.

6. Install the New Dust Cover:

   • Align the new dust cover (33x45x8 mm) with the front fork and push it into place.
   • Ensure that it fits snugly and securely.

7. Reassemble Front Fork:

   • Reattach any fender or brake components that were removed.
   • Carefully reinsert the front wheel and axle, securing it with the axle nut using a torque wrench to ensure proper tightness.

8. Final Checks:

   • Double-check that everything is tightly secured and properly aligned.
   • Test the suspension to ensure the new dust cover has been installed correctly.

9. Maintenance:

   • Regularly inspect the dust cover for wear and tear, and replace as necessary to maintain optimal performance.

Notes:

• This installation can be easily performed by DIY enthusiasts without professional tools.
• Ensure compatibility with 2003-2009 125cc vehicles for the best results.

Enjoy a smoother ride with your newly installed dust cover!