Installation Instructions for Carburetor Replacement for G3200OCT, G3200OC, and KXS 3200 Pressure Washers

Before You Begin:
Ensure you have the following tools and materials ready for a smooth installation process:

Tools Required:

1. Screwdriver (Flathead and Phillips)
   2.Wrench set
2. Pliers
   4.Cleaning brush
3. Safety goggles
   6.Gloves
4. Torque wrench (optional)

Installation Steps:

1. Safety First:

   • Turn off the pressure washer and disconnect it from the power source.
   • Wear safety goggles and gloves to protect against debris and sharp edges.

2. Remove the Old Carburetor:

   • Locate the carburetor on your pressure washer.
   • Use the screwdriver to remove the screws or bolts that secure the carburetor in place.
   • Disconnect any fuel lines carefully using pliers, ensuring there is no spillage.
   • Take out the old carburetor and inspect for any additional components that need to be removed.

3. Prepare the New Carburetor:

   • Unbox the new carburetor and check for any damage.
   • Clean the mounting area on the engine with a cleaning brush to remove any dirt or debris.

4. Install the New Carburetor:

   • Position the new carburetor onto the engine mount.
   • Secure it with the screws or bolts you removed earlier, ensuring it is properly aligned.
   • Reattach the fuel lines to the new carburetor, ensuring there are no leaks.

5. Final Checks:

   • Double-check all connections and fittings to ensure everything is secure.
   • If equipped, use a torque wrench to tighten bolts to the manufacturer’s specifications.

6. Test the Operation:

   • Reconnect the power source and start the pressure washer.
   • Allow the machine to run for a few minutes and check for proper operation and any leaks.

Note:
Following these installation instructions will help ensure that your pressure washer operates efficiently and effectively. If you encounter any issues, consult the user manual or seek professional assistance.

Enjoy enhanced performance with your newly installed carburetor!