Installation Instructions for Stainless Steel Exhaust Screws

Product Overview:
This product includes 5 pieces of stainless steel exhaust screws compatible with rear shock air valves, designed to withstand harsh environments while preventing rust and corrosion. Each set comes with an O-ring for enhanced sealing performance to prevent leaks.

Tools Required:

1. Socket or wrench set (usually metric or SAE depending on vehicle make)
2. Screwdriver (flathead or Phillips, depending on screw type)
3. Torque wrench (to ensure proper tightening)
4. Clean cloth or rag (to clean the area before installation)
5. Lubricant (optional, for easing the installation process)
6. Safety glasses (recommended for eye protection)

Installation Steps:

1. Preparation:

   • Ensure vehicle is parked on a flat surface and turned off.
   • Activate the parking brake for safety.

2. Locate the Air Valve:

   • Identify the rear shock air valve on your vehicle. Refer to your owner's manual if necessary.

3. Remove Old Screws:

   • Using the appropriate socket or wrench, carefully remove the old exhaust screws from the air valve.
   • Place old screws and components in a safe location to prevent loss.

4. Clean the Area:

   • Use a clean cloth to wipe the area around the air valve to remove dirt and debris, ensuring a proper seal.

5. Install O-Rings:

   • Take the provided O-rings and place them onto the new stainless steel exhaust screws.

6. Install New Screws:

   • Align the new screws with the air valve and gently insert them. Do not cross-thread.
   • Hand-tighten the screws initially.

7. Tighten Screws:

   • Use the torque wrench to tighten the screws to the manufacturer’s specifications.
   • Ensure not to over-tighten, as this can damage the threads or O-ring.

8. Test for Leaks:

   • Once installed, test the air system by activating it. Check for any air leaks around the newly installed screws.

9. Dispose of Old Parts:

   • Dispose of old screws and any components responsibly.

10. Final Check:

    • Double-check that all screws are secured properly before lowering the vehicle.

Note: If you experience any issues during installation or there are discrepancies in screw compatibility, consult a professional mechanic for assistance.

By following these steps, you will ensure a successful installation of the stainless steel exhaust screws, enhancing the performance of your vehicle's suspension system.