Product Installation Instructions for Compatible Air Filter Sponge

Applicable Models:
Compatible with 50cc to 200cc 4-Stroke Engines

Tools Needed:

1. Screwdriver (Phillips or flathead, depending on your vehicle)
   2.Clean cloth or paper towels
2. Mild detergent and water (for cleaning)
3. A container or bucket (for any debris)

Installation Steps:

1. Preparation:

   • Ensure your vehicle is turned off and cool to the touch.
   • Move to a well-ventilated area to avoid inhaling dust or debris.

2. Remove the Old Air Filter:

   • Locate the air filter housing on your vehicle.
   • Use the screwdriver to remove any screws or clamps securing the air filter cover.
   • Carefully take off the cover and set it aside.
   • Remove the old air filter sponge from the housing and dispose of it properly.

3. Clean the Air Filter Housing:

   • Use a clean cloth or paper towels to wipe down the inside of the air filter housing.
   • Make sure to remove any dirt or debris to ensure optimal performance.

4. Install the New Air Filter Sponge:

   • Take your new air filter sponge and position it in the air filter housing.
   • Ensure it fits snugly and forms a proper seal with no gaps.

5. Reattach the Air Filter Cover:

   • Carefully place the air filter cover back onto the housing.
   • Secure it with the screws or clamps you removed earlier.
   • Make sure everything is tightly fastened to prevent air leaks.

6. Final Check:

   • Inspect the installation to ensure everything is in place and secure.
   • Start your vehicle and listen for any unusual sounds. If everything is operating smoothly, the installation is complete.

Maintenance Tips:

• Clean the air filter sponge regularly to maintain performance.
• Wash it with mild detergent and water, let it dry completely before reinstallation.
• Reinstall the filter every few uses, or as recommended by your vehicle's manufacturer.

By following these instructions, you can easily replace your air filter sponge and ensure your engine operates efficiently. Enjoy your ride!