Installation Instructions for Front Brake Pads (2005 YBR125 / YBR125ED Model 4KL-W0045-00)

Tools Required:

1. Socket Wrench Set: To remove the caliper bolts.
2. Torque Wrench: For proper tightening of bolts.
3. Pliers: To help with the removal of the old brake pads.
4. Brake Cleaner: For cleaning the brake caliper and rotor before installation.
5. Protective Gloves: To keep your hands clean and safeguard against sharp edges.
6. Rags or Cloth: For wiping down components and cleaning any spills.

Installation Steps:

1. Preparation: Ensure your motorcycle is on a stable surface. Use a center stand or paddock stand for safety.

2. Remove the Wheel (if necessary): Depending on your motorcycle's design, you may need to remove the front wheel. Use your socket wrench to loosen the axle nut and remove the wheel.

3. Accessing the Brake Caliper: Locate the brake caliper and use the socket wrench to remove the caliper bolts. Carefully slide the caliper off the brake rotor.

4. Remove Old Brake Pads: Use pliers to gently remove the old brake pads from the caliper.

5. Clean Components: Use brake cleaner to clean the brake caliper and rotor surfaces. This is crucial for optimal braking performance.

6. Install New Brake Pads: Insert the new brake pads into the caliper in the same orientation as the old ones. Ensure they are seated properly.

7. Reattach the Caliper: Carefully slide the caliper back onto the rotor. Align it with the mounting points and tighten the caliper bolts with the socket wrench.

8. Reinstall the Wheel (if removed): Place the front wheel back onto the motorcycle and secure it with the axle nut.

9. Final Check: Use the torque wrench to ensure all bolts are tightened to the manufacturer’s specifications.

10. Test Ride: Before heading out on a longer ride, test the brakes at low speed to make sure they are functioning properly.

Note: Always refer to your motorcycle's service manual for any specific instructions or torque specifications related to your model.

Safety Reminder: If you feel uncomfortable with any aspect of the installation, please consult a professional mechanic.