Product Installation Instructions for Motorcycle Oil Filters Compatible with F3 675 (2012-2016) and F3 800 (2013-2016)

Compatibility:
This oil filter is designed to be a seamless replacement for F3 675 (2012-2016) and F3 800 (2013-2016) models.

Tools Required:

1. Socket Wrench Set

   • To remove the oil filter cover and drain plug.

2. Oil Filter Wrench

   • For easy removal of the old oil filter.

3. Drain Pan

   • To collect the old oil during the oil change process.

4. Funnel

   • To pour new oil into the engine without spills.

5. Rags or Shop Towels

   • For cleaning spills and wiping down components.

6. Torque Wrench

   • To ensure bolts are tightened to the manufacturer's specifications (if applicable).

Installation Steps:

1. Prepare the Motorcycle:

   • Ensure the motorcycle is on a stable surface, and the engine is turned off and cool.

2. Drain the Old Oil:

   • Place the drain pan underneath the oil drain plug.
   • Use the socket wrench to remove the drain plug and allow the old oil to fully drain into the pan.

3. Remove the Old Oil Filter:

   • Use the oil filter wrench to carefully remove the old oil filter.
   • Be cautious, as there may still be some residual oil in the filter.

4. Prepare the New Oil Filter:

   • Before installing the new oil filter, apply a small amount of new oil to the rubber O-ring on the top of the new filter. This helps ensure a good seal.

5. Install the New Oil Filter:

   • Screw the new filter onto the engine by hand, turning it until it is snug. Do not over-tighten.

6. Reinstall the Drain Plug:

   • Once the old oil has fully drained, reinstall the drain plug and tighten it securely.

7. Add New Oil:

   • Use the funnel to pour the new oil into the engine through the fill cap. Refer to your owner's manual for the correct oil type and quantity.

8. Check for Leaks:

   • Start the motorcycle and let it run for a few minutes. Check for any leaks around the oil filter and drain plug.

9. Dispose of Old Oil:

   • Properly dispose of the old oil and oil filter at a recycling center or according to local regulations.

By following these instructions, you can ensure a successful installation of your new oil filter, helping to protect your engine's longevity and performance. Enjoy your ride!