Motorcycle Oil Filter Installation Guide

Required Tools:

1. Socket wrench or ratchet and socket (3/8" or 1/2" drive)
2. Oil filter wrench (specific to your motorcycle model)
3. New oil filter (Motor City Oil Filter)
   4.Funnel
4. Rag or paper towels
5. Safety glasses and gloves (optional)

Step 1: Locate the Oil Filter

Identify the oil filter on your motorcycle. It is usually located on the top or side of the engine.

Step 2: Remove the Old Oil Filter

Use an oil filter wrench to loosen and remove the old oil filter. Be careful not to spill any oil when removing the filter.

Step 3: Install the New Oil Filter

Place the new Motor City Oil Filter on the engine and hand tighten it in a clockwise direction.

Step 4: Tighten the Oil Filter

Use an oil filter wrench to tighten the new oil filter an additional 1/2 to 3/4 of a turn.

Step 5: Check for Leaks

Start the engine and let it run for a few minutes. Check for any signs of oil leaks around the oil filter.

Tips and Precautions:

• Make sure to dispose of the old oil filter responsibly.
• Use a rag or paper towels to clean up any spills.
• Use safety glasses and gloves to protect yourself from any potential oil spills.
• Refer to your motorcycle's owner's manual for specific instructions on oil filter replacement.
• Use a high-quality oil that meets or exceeds your motorcycle's specifications.

Motor City Oil Filter Warranty Information:

Our oil filters are backed by a 1-year, unlimited-mileage warranty. If you experience any issues with our product, please contact us for assistance.