Product Installation Instructions for Compatible Oil Filter for ATV Models 650 800 850 Replacement

Tools Required:

1. Oil filter wrench (optional but recommended)
2. Socket wrench set
3. Drain pan
   4.Funnel
4. New oil (check your ATV’s specifications for the correct type and amount)
   6.Clean cloth or rag
5. Safety gloves
6. Safety goggles

Installation Steps:

1. Preparation:

   • Ensure the ATV is on a flat surface and the engine is turned off and cool.
   • Gather all necessary tools and materials mentioned above.

2. Drain the Old Oil:

   • Place a drain pan under the engine oil sump to catch any old oil.
   • Remove the oil drain plug using the socket wrench, allowing the old oil to fully drain into the pan.
   • Once drained, replace the oil drain plug securely.

3. Remove the Old Oil Filter:

   • If using an oil filter wrench, attach it to the old filter and turn counterclockwise to remove.
   • If the filter is stuck, use a cloth for better grip and turn gently to avoid damage.

4. Prepare the New Oil Filter:

   • Before installing the new filter, apply a small amount of fresh oil to the rubber o-ring of the new filter. This helps ensure a good seal and makes future removal easier.

5. Install the New Oil Filter:

   • Screw the new oil filter onto the engine where the old filter was located. Turn it clockwise until it is snug, but avoid overtightening.

6. Add New Oil:

   • Use a funnel to pour the new oil into the engine through the oil fill cap.
   • Refer to your ATV’s manual for the exact oil capacity and type.

7. Check for Leaks:

   • Start the engine and let it run for a few minutes.
   • Check around the oil filter and drain plug for any signs of leaks.

8. Dispose of Old Oil and Filter:

   • Safely dispose of the old oil and filter according to local laws and regulations.

9. Final Check:

   • Check the oil level using the dipstick and add more oil if necessary.

Note: Always refer to your ATV’s owner manual for specific instructions related to your model. Following these steps will help ensure proper installation and longevity of your ATV’s engine.