Installation Instructions for Replacement Pull Handle for Lawn Mower Starter

Thank you for choosing our Replacement Pull Handle compatible with petrol engine lawn mowers. This guide will help you install the pull handle easily and efficiently.

Tools Required:

• Flathead screwdriver
• Phillips screwdriver
• Socket set or wrench (if applicable)
  -Pliers
  -Clean cloth for any debris

Installation Steps:

1. Preparation:

   • Ensure the lawn mower is turned off and disconnected from any power source.
   • Clear the area around the mower to create a safe working space.

2. Remove the Old Pull Handle:

   • Locate the screws or bolts holding the old pull handle in place.
   • Use a Phillips or flathead screwdriver to remove the screws. If there are bolts, use the socket set or wrench to loosen and remove them.
   • Carefully detach the old pull handle from the starter assembly.

3. Clean the Area:

   • Wipe down the area where the pull handle attaches, ensuring there is no debris or dirt that could obstruct the new handle's installation.

4. Install the New Pull Handle:

   • Align the new pull handle with the mounting holes on the starter assembly.
   • Secure the handle by inserting the screws or bolts and tightening them with the screwdriver or wrench. Ensure it is firmly in place.

5. Test the Installation:

   • After installation, gently pull the handle to test its functionality.
   • Check if it smoothly returns to its original position and engages the starter mechanism properly.

6. Finishing Up:

   • Clean up your workspace and dispose of the old handle appropriately.
   • Store your tools in a safe place for future use.

Conclusion:
Your Replacement Pull Handle is now installed and ready for use. Enjoy a more efficient and comfortable lawn mowing experience!

If you encounter any issues or have questions during installation, please refer to the product manual or contact customer support for assistance.