Product Installation Instructions for Turbo Oil Return Drain Flange Adapter AN10

Compatible with: GT28, GT30, GT35, T25 Turbochargers (EP-TF006)

Tools Required:

1. Wrenches/Sockets:

   • Common sizes (10mm, 12mm, 14mm) depending on your setup.

2. Torque Wrench:

   • To ensure proper torque specifications are met during installation.

3. Flathead Screwdriver:

   • For any adjustments or to pry open any fittings if necessary.

4. Allen Keys (Hex Wrenches):

   • If your turbochargers use hex screws for fastening.

5. Sealant/Thread Tape:

   • High-temperature thread sealant or tape for any threaded connections to prevent leaks.

6. Oil Catch Pan:

   • To catch any residual oil during the removal of the old hardware.

7. Rags:

   • For cleaning and wiping off any spilled oil or debris.

8. Safety Glasses and Gloves:

   • For personal protection during the installation process.

Installation Steps:

1. Preparation:

   • Ensure the engine is cool and the vehicle is on a level surface.
   • Disconnect the battery for safety.

2. Remove Existing Drain:

   • Place an oil catch pan underneath the turbocharger to catch any spilled oil.
   • Remove the existing oil return line from your turbocharger using the appropriate wrench/socket.

3. Clean Connection Points:

   • Clean the mounting surfaces where the new adapter will be installed to ensure a proper seal.

4. Install the Turbo Oil Return Drain Flange Adapter:

   • Position the AN10 adapter onto the turbocharger's oil return port.
   • Secure the adapter using the provided hardware. Ensure to follow the recommended torque specifications using the torque wrench.

5. Connect the Oil Return Line:

   • Connect the oil return line to the new AN10 adapter. Use sealant/thread tape on threads to prevent leaks.

6. Final Checks:

   • Inspect all connections to ensure they are tightened and sealed properly.
   • Check surrounding areas for any debris or spills.

7. Reconnect Battery:

   • Once everything is securely in place, reconnect the battery.

8. Test Run:

   • Start the engine and monitor the turbocharger for any signs of leaks or unusual noises during operation.

Enjoy your enhanced turbo performance with the Turbo Oil Return Drain Flange Adapter AN10!