Installation Instructions for Motorcycle Speedometer Drive Gear (Compatible with NX650 Models Excluding 1991 Year)

Tools Needed:

1. Socket Wrench Set
2. Screwdriver Set (Flat and Phillips Head)
3. Torque Wrench
4. Pliers
   5.Clean Rags
5. Lubricating Grease (optional)
6. Safety Goggles
7. Work Gloves

Installation Steps:

1. Prepare the Workspace:
   Ensure you are working in a clean and well-lit area. Use safety goggles and work gloves to protect yourself during the installation.

2. Gather Tools:
   Collect all the necessary tools listed above and place them within reach.

3. Remove the Old Drive Gear:

   • Locate the speedometer drive gear on your NX650 motorcycle.
   • Use the socket wrench to remove any bolts securing the old drive gear.
   • Carefully detach the old gear from its housing. If it is stuck, gently wiggle it free with pliers.

4. Inspect the Area:
   Before installing the new drive gear, clean the area with a clean rag to ensure there is no dirt or debris that might affect performance.

5. Install the New Drive Gear:

   • Position the new speedometer drive gear into the housing and ensure it fits snugly.
   • If necessary, apply a small amount of lubricating grease to the gear for smoother operation.
   • Secure the drive gear in place using the bolts removed earlier. Use the torque wrench to tighten them to the manufacturer's specified torque setting.

6. Reassemble Any Removed Parts:
   If you had to remove any additional components to access the drive gear, be sure to reattach them securely.

7. Test the Installation:
   Before taking your motorcycle for a ride, start the engine and check the functionality of the speedometer. Ensure it is displaying the correct speed.

8. Final Check:
   After your ride, double-check all mounting points and connections to ensure everything is secure.

By following these steps, you can successfully install the Motorcycle Speedometer Drive Gear and enjoy a more accurate speed reading for improved safety and riding experience.