Installation Instructions for Gasket Kit for Small Engine 698216 Set Replacement for 695155 690031

Tools Needed:

1. Screwdriver Set (Flat-head and Phillips)
   2.Wrench Set
2. Torque Wrench
3. Gasket Scraper or Putty Knife
   5.Clean Cloth or Rag
4. Engine Oil (for reassembly)
5. Safety Gloves
6. Safety Goggles

Installation Steps:

1. Preparation:

   • Ensure that the small engine is turned off and cooled down completely.
   • Disconnect the spark plug wire to prevent accidental starting during the installation.

2. Remove Old Gaskets:

   • Use a gasket scraper or putty knife to carefully remove the old gaskets from the engine surfaces.
   • Clean the area thoroughly using a clean cloth to remove any debris or residue.

3. Inspect Engine Components:

   • Inspect all components for any signs of wear or damage. Replace any damaged parts as necessary.

4. Install New Gaskets:

   • Take the new gaskets from the Gasket Kit and align them properly with the engine surfaces.
   • Apply a thin layer of engine oil to the gaskets to aid in sealing and make installation easier.

5. Reassemble Engine:

   • Carefully place any removed parts back onto the engine, ensuring that the gaskets are properly situated.
   • Use the wrench set to tighten bolts and screws securely. Follow the manufacturer's torque specifications, using the torque wrench for accuracy.

6. Final Check:

   • Double-check all connections and ensure everything is tightened properly.
   • Reconnect the spark plug wire.

7. Testing:

   • Start the engine and let it run for a few minutes.
   • Check for any signs of oil leaks or irregular sounds. If everything runs smoothly, your installation is complete.

Safety Precautions:

• Always wear safety gloves and goggles while working on the engine.
• Ensure that the work area is well-ventilated and free from any flammable materials.

By following these steps, you can easily install the Gasket Kit for Small Engine 698216 and enhance the performance of your small engine equipment.