Product Installation Instructions for Compatible Motorcycle Air Filter

Models Compatible:

• 1200 (2001-2005)
• 1200S (2001-2006)
• 600 (2000-2004)
• 600S

Tools Required:

• Phillips screwdriver
• Flathead screwdriver
  -Torque wrench
  -Cleaning cloth
• Gloves (optional)

Installation Steps:

1. Preparation:

   • Park your motorcycle on a level surface and turn off the ignition.
   • Put on gloves to keep your hands clean during the installation.
   • Gather all the necessary tools listed above.

2. Accessing the Air Filter:

   • Use a Phillips screwdriver to remove the screws securing the air filter cover.
   • Carefully lift off the air filter cover to expose the old air filter.

3. Removing the Old Air Filter:

   • Gently pull out the old air filter from its housing.
   • Inspect the filter housing for any debris or dirt, and clean it with a cloth if necessary.

4. Installing the New Air Filter:

   • Take the new air filter and insert it into the housing, ensuring it fits snugly and evenly.
   • Ensure that the filter's sealing edges are properly aligned with the housing to prevent air leaks.

5. Reattaching the Air Filter Cover:

   • Place the air filter cover back over the filter and secure it using the screws you previously removed.
   • Make sure the cover is tightly fastened to prevent any air leaks.

6. Final Check:

   • Double-check all screws and ensure the air filter is securely in place.
   • Close the motorcycle’s seat or any covers you may have removed.

7. Testing:

   • Start the motorcycle and let it idle for a few minutes.
   • Check for any unusual noises or air leaks.

8. Maintenance Reminder:

   • Remember to check and replace the air filter regularly to maintain optimal performance and a comfortable riding experience.

By following these steps, you will enhance your motorcycle's performance, ensuring a better ride every time. Happy riding!