Product Installation Instructions for Oil Filter Compatible with S UH200, UH 200, UX125, UX 125, UX150, UX 150 Models (2008-2012)

Tools Required:

1. Oil filter wrench
2. Socket wrench set
3. Oil drain pan
   4.Funnel
   5.Clean cloth or rags
4. New engine oil (as per manufacturer specifications)
5. Safety gloves
6. Safety glasses

Installation Steps:

1. Preparation:

   • Ensure the vehicle is parked on a level surface.
   • Turn off the engine and allow it to cool down completely.
   • Put on safety gloves and glasses for protection.

2. Lift the Vehicle:

   • If necessary, use a jack to lift the vehicle and secure it with jack stands. This will give you better access to the oil filter.

3. Drain the Old Oil:

   • Place the oil drain pan beneath the oil pan.
   • Remove the oil drain plug with the socket wrench and allow the old oil to drain completely into the pan.
   • Once drained, replace and tighten the oil drain plug.

4. Locate the Oil Filter:

   • Use the oil filter wrench to remove the old oil filter. Turn it counterclockwise until it is free from the engine.
   • Be cautious as some old oil may still be in the filter; allow it to drain into the pan.

5. Prepare the New Oil Filter:

   • Apply a small amount of new engine oil to the rubber O-ring of the new oil filter. This will ensure a good seal and make it easier to remove during the next oil change.

6. Install the New Oil Filter:

   • Screw the new oil filter onto the engine by hand. Make sure it is tightened adequately, but do not overtighten.

7. Add New Engine Oil:

   • Using a funnel, pour the new engine oil into the engine via the oil filler cap. Refer to your vehicle’s manual for the correct oil type and quantity.
   • Replace the oil filler cap securely.

8. Check for Leaks:

   • Start the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug.
   • Turn off the engine and check the oil level with the dipstick, adding more oil if necessary.

9. Clean Up:

   • Properly dispose of the old oil and oil filter according to local regulations.
   • Clean any spilled oil with a cloth or rags and store your tools properly.

Conclusion:
Following these steps will ensure a successful installation of your new oil filter. Enjoy enhanced engine performance and increased longevity for your vehicle with regular maintenance.