Dual-Stage Foam Air Filter Installation Instructions

Tools Needed:

1. Flathead Screwdriver - For loosening and tightening screws.
2. Phillips Screwdriver - For any screws that may require a Phillips head.
3. Wrench Set - In case there are bolts that need to be removed.
4. Cleaner for Air Filter - Recommended for cleaning the old filter.
5. Towel or Rag - For wiping and cleaning surfaces.
6. Gloves - To protect your hands while working.

Installation Steps:

1. Preparation:

   • Ensure your motorcycle is turned off and parked on a level surface.
   • Wear gloves for protection.

2. Remove the Old Air Filter:

   • Locate the air filter housing on your motorcycle.
   • Use a flathead or Phillips screwdriver to remove any screws securing the air filter cover.
   • Carefully take out the old air filter and set it aside.

3. Clean the Housing:

   • Use a towel or rag to wipe the inside of the air filter housing and remove any dirt or debris.
   • Inspect for any damage or wear.

4. Install the New Dual-Stage Foam Air Filter:

   • Place the new air filter into the housing, ensuring it fits snugly and securely.
     -Align any holes or openings for screws or bolts with the filter.

5. Reattach the Air Filter Cover:

   • Secure the air filter cover back in place using the screws you removed earlier.
   • Ensure everything is tightly secured without overtightening.

6. Final Check:

   • Make sure there are no loose screws or parts.
   • Start the engine and listen for any unusual sounds, confirming the filter is installed correctly.

Maintenance Tips:

• Clean the foam air filter regularly to maintain optimal performance.
• Follow product instructions for proper cleaning techniques to prolong the filter's lifespan.

Enjoy your enhanced riding experience with your new dual-stage foam air filter!