Product Installation Instructions for 10pcs Motorcycle Carburetor Main Jets

Compatibility:

These carburetor main jets are compatible with RX100, AX100, and various TM series models.

Tools Required:

Before you begin the installation, ensure you have the following tools ready:

1. Wrench Set - A suitable wrench for removing and installing the carburetor.
2. Screwdriver Set - A flathead and Phillips screwdriver to remove screws.
3. Pliers - For gripping small components and removing old jets.
4. Cleaning Cloth - To keep the area clean during the installation process.
5. Fuel Line Pliers (optional) - If you need to disconnect any fuel lines.
6. Torque Wrench (optional) - For precise tightening of bolts if required.
7. Safety Goggles - To protect your eyes while working.

Installation Steps:

1. Preparation:

   • Make sure the engine is cool and the motorcycle is securely on a stand.
   • Disconnect the battery to prevent any electric hazards.

2. Access the Carburetor:

   • Use the wrench to remove the bolts securing the carburetor to the engine.
   • Carefully detach the carburetor from the intake manifold.

3. Remove the Old Main Jets:

   • Locate the main jet at the bottom of the carburetor float bowl.
   • Use a screwdriver or pliers to carefully unscrew the old main jets.

4. Install the New Main Jets:

   • Take one of the new main jets from the pack.
   • Screw it into place securely using your fingers, followed by a gentle tightening with the pliers, if necessary.

5. Reassemble the Carburetor:

   • Reattach the float bowl to the carburetor and secure it with screws using the screwdriver.
   • Ensure all seals and gaskets are properly in place to prevent leaks.

6. Reconnect the Carburetor:

   • Carefully place the carburetor back onto the intake manifold and align it properly.
   • Use the wrench to secure it in place.

7. Reattach Fuel Lines:

   • If you disconnected any fuel lines, ensure they are reattached securely.

8. Reconnect the Battery:

   • Once everything is reassembled, reconnect the battery.

9. Test the Installation:

   • Start the engine and let it idle. Check for any leaks or unusual sounds.
   • Test the throttle response to ensure proper functioning.

Conclusion:

You've successfully installed the new main jets in your motorcycle carburetor! Enjoy the enhanced performance of your bike. Regular maintenance will keep it running smoothly.

Please make sure to follow safety precautions and consult a professional mechanic if you are unsure about any steps. Happy riding!