Engine Air Filter Installation Instructions for F650 GS, Dakar, G650 GS, and Sertao

Tools Required:

1. Screwdriver Set (Phillips and flathead)
2. Socket Set (if applicable for your model)
3. Pliers
4. Clean Cloth or Shop Towel
5. Safety Goggles (optional, for eye protection)

Installation Steps:

1. Preparation:

   • Park your motorcycle on a level surface and ensure the engine is completely cool.
   • Disconnect the battery (negative terminal) to avoid any electrical issues during installation.

2. Access the Air Filter:

   • Locate the air filter compartment. This is typically found near the engine, under the seat or side panels.
   • Remove any screws or bolts holding the cover using the appropriate screwdriver or socket.

3. Remove the Old Air Filter:

   • Gently pull out the old air filter from its compartment.
   • Use a clean cloth to wipe any dust or debris from the air filter housing.

4. Install the New Air Filter:

   • Take your new Engine Air Filter and position it correctly in the housing. Ensure it fits snugly and seals properly.
   • Avoid touching the filter surface with your hands to prevent any oil or dirt from contaminating it.

5. Reassemble the Air Filter Compartment:

   • Replace the cover and secure it with the screws or bolts you removed earlier.
   • Make sure everything is tightened properly to prevent any air leaks.

6. Reconnect Battery:

   • Reconnect the battery’s negative terminal securely.

7. Final Check:

   • Start the engine and listen for any unusual noises. Make sure the airflow is consistent and there are no leaks.

8. Maintenance Reminder:

   • Set a reminder to check and replace the air filter regularly to ensure optimal performance and engine longevity.

Conclusion:

By following these simple steps and using the required tools, you can easily replace the Engine Air Filter on your F650 GS, Dakar, G650 GS, or Sertao. Regular maintenance will help extend the life of your engine and improve fuel efficiency. Enjoy your ride !