Product Installation Instructions for Motorcycle Starter Motor (11 Teeth)

Compatibility:
This starter motor is compatible with various racing models, including ZS166FMM, CB250D-G, T2, T4, BSE, KAYO, ensuring broad applicability for users.

Installation Requirements:

Tools Needed:

1. Socket Wrench Set: A set of socket wrenches will help you easily remove and tighten bolts.
2. Screwdrivers (Phillips and Flathead): A variety of screwdrivers will be necessary for different types of screws.
3. Pliers: Useful for gripping, twisting, or cutting wires if required.
4. Torque Wrench: To ensure bolts are tightened to the manufacturer’s specifications.
5. Cable Ties: For securing any loose wires after installation.
6. Safety Goggles: Recommended to protect your eyes during installation.
7. Gloves: To protect your hands and ensure a better grip.

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is turned off and parked on a flat surface.
   • Disconnect the battery to prevent any electrical shorts.

2. Remove the Old Starter Motor:

   • Use the socket wrench to remove any bolts securing the old starter motor.
   • Disconnect any wires or connectors attached to the old starter motor.

3. Install the New Starter Motor:

   • Position the new starter motor in place.
   • Connect the wires and make sure they are secured properly.
   • Use the socket wrench to tighten the securing bolts.

4. Check Connections:

   • Ensure all connections are tight and secure.
   • If necessary, use cable ties to secure any loose wires.

5. Reconnect the Battery:

   • Carefully reconnect the battery terminals, ensuring proper polarity.

6. Test the Installation:

   • Turn on the motorcycle and test the new starter motor. Ensure smooth operation and that the engine starts efficiently.

Conclusion:
With the tools listed and following the steps outlined, you can successfully install the Motorcycle Starter Motor. The 11-tooth design ensures high start efficiency and enhances the overall riding experience. Enjoy your ride!