Installation Instructions for Rear Wheel Damper Bush Compatible with 125cc Motorcycles

Product Code: 41241-KB4-003

Before You Begin:

To ensure a smooth installation process, please gather the following tools and materials before starting:

Tools Required:

1. Socket Wrench Set - To remove and install nuts and bolts.
2. Torque Wrench - To ensure proper tightening of bolts to manufacturer specifications.
3. Pliers - For gripping and holding components during installation.
4. Flathead Screwdriver - To assist in prying or adjusting components if necessary.
5. Rubber Mallet - To gently tap the damper bush into place without damaging it.
6. Clean Cloth - To wipe any dirt or debris from the motorcycle components before installation.
7. Safety Goggles - To protect your eyes during the installation process.
8. Gloves - To keep hands clean and protected.

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is parked on a flat surface and turned off.
   • Place the motorcycle on a stable stand or lift to elevate the rear wheel.

2. Remove the Old Damper Bush:

   • Locate the rear wheel damper bush on your motorcycle.
   • Use the socket wrench to remove any retaining bolts holding the old damper bush in place.
   • Carefully pull out the old damper bush. You may need to use the pliers if it's stuck.

3. Clean the Area:

   • Wipe the area where the new damper bush will be installed to remove any dirt or debris.

4. Install the New Damper Bush:

   • Take the new rear wheel damper bush and align it with the designated fitment area.
   • Use the rubber mallet gently to tap the bush into place if necessary.

5. Secure the Installation:

   • Once the bush is in position, replace the retaining bolts using the socket wrench.
   • Use a torque wrench to tighten the bolts to the specified torque settings (refer to your motorcycle's manual for specifications).

6. Final Checks:

   • Check everything to ensure all bolts are tight and the damper bush is securely in place.
   • Lower the motorcycle from the stand and inspect the installation visually.

7. Test Ride:

   • Take your motorcycle for a short ride to test the new damper bush. Ensure that you notice improved comfort and handling.

Safety Precautions:

• Always wear safety goggles and gloves while working on your motorcycle.
• If you are not confident in performing the installation, seek assistance from a professional mechanic.

Thank you for choosing our Rear Wheel Damper Bush. Enjoy your improved riding experience!